Added for You - Business

Business Secrets Revealed:1. Business is Production
Business is a single word or a subject, when analyzed gives a bundle of meanings and explanations. We define business in various ways on diverse circumstances.Generally, business is a profession of producing goods and services for a profit. When we say production, this involves the human labor prima

osphere, and that equals a garbage weld.

You can use a lot of different ways to open rod cans out in the field if you are careful. I've even used the P38 C ration can opener I had in the army.If you use an oxygen/acetylene torch you need to be real careful not to burn the flux on the rods inside.

You can open a rod can wit

Procurement Definition
Procurement can be defined as the purchase of merchandise or services at the optimum possible total cost in the correct amount and quality. These good and services are also purchased at the correct time and location for the express gain or use of government, company, business, or individuals by signing a contract

Welding rods get no respect. Out in the field I've seen guys throwing 50lb. rod cans from the truck onto the ground, torching cans open diagonally, beating the wrong end open with a chipping hammer and every other conceivable tool, and leaving open rod cans out in the open.

Let's look at what's wrong with each…

First and foremost, ALWAYS open the "right" end of the can. Some cans and boxes even say "open other end", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you can pretty much kiss that rod goodbye. It's worse, if you don't realize it's chipped because right in the middle of a good weld you'll suddenly be welding with no flux. No flux equals no shielding from the atmosphere, and that equals a garbage weld.

You can open a rod can with

Reducing the Risk of Failure in CRM Implementations
There are many software applications available for managing customer interactions, or customer relationship management (CRM). It is a mistake to assume that once you've seen one, you've seen them all, because they are not all the same.One of the easiest ways a prospective client can reduce the risk of fail

d foremost, ALWAYS open the "right" end of the can. Some cans and boxes even say "open other end", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

You can open a rod can wit

Your Team Members Don't Have To Be Perfect
I would like to say that, the biggest room in the world is the room for improvement. I believe everyone wants to constantly improve. I believe each one of us is created as perfection; however, the results we create are excellent, so there is lots of room for improvement in what we do. The associates I hired in my

ectrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

You can open a rod can wit

Business Consultants - Why Don't People Listen?
So many business consultants often say that they are tired of being right all the time and wish that their clients or business associates would listen. They get upset and admit that millions of dollars were wasted because they just did not listen. One top-notched consultant from PA mentioned this to me not long a

he welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you can pretty much kiss that rod goodbye. It's worse, if you don't realize it's chipped because right in the middle of a good weld you'll suddenly be welding with no flux. No flux equals no shielding from the atmosphere, and that equals a garbage weld.

You can open a rod can wit

Localization Of Products
Localization means adapting the product or service in such a manner that it is able to successfully sustain itself in a foreign market. Due to the vast diversity between certain markets, merely translating the text from one language to the other is not the solution anymore. A phrase or idiom from English would ne

osphere, and that equals a garbage weld.

You can open a rod can with a chipping hammer, but it's not advisable. You gotta' be sure and hit it just right, at the edge of the can. You should hit the edge with the hammer follow-through swinging away from the can, not striking down into the can at the top. (I'm sure the electrode manufacturers are cringing when they read this!)

Of course the best way is whatever the can is designed for, some of them open like a sardine can, but a lot of times it doesn't work so you gotta' improvise.

Leaving open cans out allows moisture to get into the flux. Moisture in the flux can cause porosity, or worm holes in the weld. Rods should be stored in a proper oven or unheated container if they don't need the moisture protection. 7018 needs an oven, while 6010 doesn't need the heat, but still needs to be kept protected.

HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.added4u.com/article/2576/added4u-The-Proper-Handling-of-Welding-Rods.html">The Proper Handling of Welding Rods</a>

BB link (for phorums):
[url=http://www.added4u.com/article/2576/added4u-The-Proper-Handling-of-Welding-Rods.html]The Proper Handling of Welding Rods[/url]

There are a variety of ways in which we might be inadvertently frustrating our customers and clients. One of the most common involves our policies and procedures, which may be unnecessarily confusing or restrictive. By being alert for situations that put our customers on the defensive and handling those situations gracefully, we can retain our customers' loyalty and avoid driving them away.

Outsourcing cannot be considered a new phenomenon even though the rising attention toward this subject has brought lots of important issues into the daylight. Lots of service and even manufacturing companies started creating jobs overseas to gain wider access to foreign markets. They act as consultants auditors and perform other functions where their customers are. Putting it in other words, they have found customers and came to serve them. Another reason for a big number of emerging foreign companies oversees is saturation of the domestic markets.

In many parts of the country, winter brings with it wet and icy conditions. This is dangerous not only for driving, but also for walking! Thousands of injuries occur from people slipping and falling because of ice and snow. Reducing injuries is possible when your employees take a little extra time and taking a few precautions to avoid slips and falls.

Tags

Links

Added for You - The Proper Handling of Welding Rods

Related Articles: