Tags |
|
|
Links |
|
|
Added for You - Ebonizing - A Cheap Alternative To Using Ebony?
The notion of the "Meritocracy", the idea that a person's rewards in a society should reflect his or her "merit" which might be defined as the amount of value that person has in terms of the ongoing needs of the society in which they live.In the oft heard tale, the gal with the high GPA may be doing the work and gaining the
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again!<
Since the ‘fat-free’ craze began, statistics show people in developed countries such as the USA, UK and Australia, have grown fatter and fatter! Just because a food is fat-free doesn’t mean it’s energy free or calorie free. If you are trying to cut out all forms of fat from your diet, you may be risking your health.Although
If you use water-based stains you may have to lightly sand after staining because water-based stains tend to raise the grain a little. It depends on your final finish and, of course, your personal preferences.
Here we're talking specifically about ebonizing - making the wood as near black as we can. There are commercial stains you can buy, and you can even use boot black (it's a wax polish, after all, although it doesn't soak in very well), but how about a stain you can make with things you almost certainly have lying around the house?
Here are those ingredients:
A jar (best if it has a plastic lid so it won't rust, but not vital) A piece of coarse steel wool or some old nails (not galvanized - it won't work) Some ordinary vinegar
That's the lot! Put the steel wool or nails in the jar, add enough vinegar to cover them and close the lid. Now just leave it for the vinegar to do it's work. Two or three days should be fine but you may want to experiment. Finally, strain the liquid through a cloth (or a coffee filter) so you don't have any particles and apply to some wood using your method of choice.
As you can see, this isn't rocket science, and varying the proportions of vinegar to metal will effect the stain as will the length of time it brews. The other thing to remember is that different woods will absorb the stain differently so you might need more than one application, and the colour will vary. Always follow the golden rule: test it on a scrap piece first. You'll also probably find that the wood will continue to change colour for a day or two, possibly longer, after you have stopped applying the stain. There's nothing you can do about this except be patient. There's unlikely to be any change a week after application.
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again! Saunas and Infrared Saunas
When I think of a sauna, I think of luxury resorts, hotels, gyms and holidays abroad. Now, with the help of new technology, you can have an infrared saunas in your very own home, bringing this luxury pastime into your dwelling abode. The Finns have long made saunas a tradition and continue to uphold this culture where there is on
Here we're talking specifically about ebonizing - making the wood as near black as we can. There are commercial stains you can buy, and you can even use boot black (it's a wax polish, after all, although it doesn't soak in very well), but how about a stain you can make with things you almost certainly have lying around the house?
Here are those ingredients:
A jar (best if it has a plastic lid so it won't rust, but not vital) A piece of coarse steel wool or some old nails (not galvanized - it won't work) Some ordinary vinegar
That's the lot! Put the steel wool or nails in the jar, add enough vinegar to cover them and close the lid. Now just leave it for the vinegar to do it's work. Two or three days should be fine but you may want to experiment. Finally, strain the liquid through a cloth (or a coffee filter) so you don't have any particles and apply to some wood using your method of choice.
As you can see, this isn't rocket science, and varying the proportions of vinegar to metal will effect the stain as will the length of time it brews. The other thing to remember is that different woods will absorb the stain differently so you might need more than one application, and the colour will vary. Always follow the golden rule: test it on a scrap piece first. You'll also probably find that the wood will continue to change colour for a day or two, possibly longer, after you have stopped applying the stain. There's nothing you can do about this except be patient. There's unlikely to be any change a week after application.
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again!<
Yes you heard it right! Golf stretches in your office. What a great way to take a quick break from your computer to not only feel better in the moment, but improve your game at the same time.I’ve come up with many clever ways to work around the “I don’t have time” reason (excuse).You can’t tell me you don’t have 15
A jar (best if it has a plastic lid so it won't rust, but not vital) A piece of coarse steel wool or some old nails (not galvanized - it won't work) Some ordinary vinegar
That's the lot! Put the steel wool or nails in the jar, add enough vinegar to cover them and close the lid. Now just leave it for the vinegar to do it's work. Two or three days should be fine but you may want to experiment. Finally, strain the liquid through a cloth (or a coffee filter) so you don't have any particles and apply to some wood using your method of choice.
As you can see, this isn't rocket science, and varying the proportions of vinegar to metal will effect the stain as will the length of time it brews. The other thing to remember is that different woods will absorb the stain differently so you might need more than one application, and the colour will vary. Always follow the golden rule: test it on a scrap piece first. You'll also probably find that the wood will continue to change colour for a day or two, possibly longer, after you have stopped applying the stain. There's nothing you can do about this except be patient. There's unlikely to be any change a week after application.
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again!<
We thought that the Vikings couldn't sink any lower then they had after game 3. Then came the alleged sex cruise scandal. The cruise was the Vikings way of spending their bye week preparing for the the Chicago Bears. We thought that this was the lowest point. Sure. Well it wasn't. The low point hit on Sunday's game against t
As you can see, this isn't rocket science, and varying the proportions of vinegar to metal will effect the stain as will the length of time it brews. The other thing to remember is that different woods will absorb the stain differently so you might need more than one application, and the colour will vary. Always follow the golden rule: test it on a scrap piece first. You'll also probably find that the wood will continue to change colour for a day or two, possibly longer, after you have stopped applying the stain. There's nothing you can do about this except be patient. There's unlikely to be any change a week after application.
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again!<
Massage therapy can offer senior citizens a number of benefits that will greatly improve their sense of health and wellbeing. As the population continues to age, it is important to consider ways that we can work to improve the lives of those affected by the passing of time. A number of studies have shown that massage therapy can
I've experimented with wax as a final finish over the top, and with poly, both without problems. I haven't yet tried Danish or Tung oil, though I suspect they'll be fine. If in doubt, back to the golden rule again!
Unfortunately the method is a bit inconsistent so you'll find it very difficult to get two batches the same. Always make up enough for the job in hand in one go. If you want to be safe, go to the store and buy the stuff they've got there, but if you enjoy experimenting a bit this is great fun.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.added4u.com/article/363963/added4u-Ebonizing--A-Cheap-Alternative-To-Using-Ebony.html">Ebonizing - A Cheap Alternative To Using Ebony?</a>
BB link (for phorums):
[url=http://www.added4u.com/article/363963/added4u-Ebonizing--A-Cheap-Alternative-To-Using-Ebony.html]Ebonizing - A Cheap Alternative To Using Ebony?[/url]
Related Articles:
The Cast of Culture in South Africa
Baby Strollers - Consider Your Budget
Bookmark it:
|